Quick and cheap loader extender

[alexinPA]

Used for light materials: grass, leaves and chips. Little over 1 yard capacity

 

[tomhikes]

I like this. Especially the simple attachment.
Tom

 

[crazyjake8493]

Good idea! I need to do something like this before next fall for leaf cleanup. Much easier than dragging a tarp around, and I could dump them right into the garden beds.

 

[Tomtint]

I wonder if you could weld a couple tabs inside the back , bottom of the bucket that would stop the plywood from wanting to flip up and forward.

 

[Yander]

I like it, might be going after a sheet of plywood. I have to clean out the chicken coop and one last leaf cleanup. Thanks for sharing.

I built this contraption out of scrap pallets and plywood and lumber I had around the property and FILs barn. It was better than a tarp but what you built appears to as it would be better. Used pallet forks with it. I could build something like you did for my pallet forks.

 

[alexinPA]

I wonder if you could weld a couple tabs inside the back , bottom of the bucket that would stop the plywood from wanting to flip up and forward.

2 by 4 on the bottom of each side preventing plywood from moving up and straps holding it in place. Never moved at any direction. I can screw plywood to 2x4s if I don't want to use straps.

 

[scootr]

My Wife's Aunt made one for the Kubota out of plywood and 2x4s years ago to haul horse manure ~ reduced the number of trips to the field.