Quick Couplers with male SAE-8?

[npalen]

Needing some help identifying this QD male tip. I'm needing a matching set (coupler and tip) so can tap into the FEL power beyond line for power to rear remotes.
The thread in the tip is a 3/8"-14 NPT if that helps with the ID.
Edit: The diameter of the tip is 0.680".

 

[Discount Hydraulic Hose]

Print this page full size.

http://www.discounthydraulichose.com/v/vspfiles/downloadables/sizechart.pdf

Hold your male coupler up to outlines and see which one it matches. My best guess from here is 3/8" 7241-1 Series B (700 Series Couplers at ISO 7241-1 Series B Hydraulic Quick Disconnect Couplers) but I can't be 100% sure just looking at the photo. There are other couplers that look very similar, so the profile matching is the best way to be certain.

 

[Zebrafive]

I think it's an A series NOT a B series. Measure from the edge of the tip (not the poppet) to the first ring. A series is 3/8". B series is 1/2"

 

[npalen]

Thanks guys!!! I can see now that it is definitely the A series. That will get me going.