PatentGuy
Member
Of the many that are out there in the $200 to $300 dollar range, none seem to be stated to be QH compatible. Thus I was wondering if anyone has actual knowledge.
Thank you!
Thank you!
Quick Hitch Compatible Carry All Frame
- Thread starter PatentGuy
- Start date
- Views: 852
-
- Tags
- quick hitch
Tinhack
Elite Member
- Joined
- Jul 3, 2020
- Messages
- 3,472
- Location
- Lytle, TX
- Tractor
- Ford 3910, John Deere 420C, Kubota G32XKS, IH 2606, Bad Boy Maverick-60"
The one from Tractor Supply show images with it attached to a QH. One comment said the person had trouble with the top pin though. I had that problem with my cutter but solved that by buying the extended top hook for the QH.
The tractor supply one comes in at least two flavors that I've seen. I had to cut into mine quite a bit to get it to work. The top link on mine wasn't down nearly as far as the one currently posted on their website. Consequently I had to use the QH hook in a different position from my other QH implements. Also it did not come with the two different sets of holes for the bottom pins. In the long run I drilled new holes on the sides and made the whole thing shorter, height wise. I made mine into a dumping carry-all and wanted it to be as high in the air as possible.
