Mowing RCR 1860 help

   / RCR 1860 help #1  

lastborn

Member
Joined
Mar 20, 2012
Messages
31
Location
Clemson sc
Tractor
Kubota B3200
Could some of you good people please tell what size socket I need to remove the blades ** and the blade carrier on a Land Pride RCR 1860 bush hog please.
Also, is it regular thread { turn clockwise to tighten } ?
thanks
 
   / RCR 1860 help
  • Thread Starter
#4  
Ok, I got the nut off of the blade carrier and the two blades and blade bolts that go thru the stump jumper--- how does the stump jumper and the blade carrier come off :confused:please?
thanks
 
Last edited:
   / RCR 1860 help
  • Thread Starter
#6  
I have the manual--it"s worthless
thanks
 
   / RCR 1860 help
  • Thread Starter
#7  
Whoever came up with the chain an bottle jack method I read about on here has my vote on how to remove the stump jumper. It works, plain and simple. Now, the jumper has a slight wobble, any Ideas on how to true it up? Doesnt wobble much but you can feel it at pto speed--thats why I took it off in the first place. It;s not beat-up and looks good except fot the wobble. Could a machine shop fix it? Don't want to buy a new one if I don"t have to. Are all blade carriers welded to the stump jumper? Mine is.
Thanks
 
   / RCR 1860 help #8  
Trying to tighten nuts holding gearbox to the deck. Stump jumper was a PAIN. I used Kroil, sledge, torch, bottle jack and chain as well as wooden wedges driven under pan and wetted for expansion, gear puller. It would not bulge.
Then I had an epiphany..... drilled a 1 inch hole through the pan to access nuts holding gearbox to deck. It was easy-greasy
 

Tractor & Equipment Auctions

71053 (A49346)
71053 (A49346)
SHOP MADE  MANIFOLD TRAILER (A50854)
SHOP MADE...
Vermeer SC802 (A50322)
Vermeer SC802 (A50322)
2011 IC Corporation PB105 School Bus (A49461)
2011 IC...
AC CHARGING MACHINE (A50854)
AC CHARGING...
TTS5-10680 Rubber Tire Asphalt Roller (A49461)
TTS5-10680 Rubber...
 
Top