Real time advice re Kuboda R520S

AUSTENNN10 · Jun 8, 2015

This has my attention. I have 11 pallets of block coming in 3 hours. Each pallet weighs 3,825. The tipping load straight for a Kuboda R520S is 3,870.

I am assuming that the load limit is the limit, it will tip if you go over.

I need to at least backup and lower the load. This will be done in the street. I plan on taking block off the pallet prior to lifting.

Advice-How many 85 pound blocks should I remove? What should I look for and or be aware of. Lower as slow as possible seems to make sense.

I am an LS 3033 owner but this is out of my norm.

TIA

jenkinsph · Jun 8, 2015

I would take off the top layer of block if you have to climb any sort of grade. I am working in Alto all week if you need assistance. Most of the block and stone I have delivered is staged with the trucks fork lift. If you have to maneuver on any of the steep grades such as Lakeshore be very careful.