melvinhatcher
Bronze Member
I have a King Kutter landscaping rake and Countyline back blade. Is there a way to lubricate the swivel on these implements? 
Rear back blade / Landscaping rake?
- Thread starter melvinhatcher
- Start date
- Views: 3605
Barry Bowen
Gold Member
unless you want to go through trying to put a grease fitting on, just oil it as best you can. They will wear no mater what you do.
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Greasing isn't really necessary. The swivel aren't under any constant load or are swiveled that often.
You can use a spray white grease and give the swivels a good shot. I've done this with a very old (no idea of the brand, but wouldn't be surprised if it's older then I am) rear blade I've had for years...still swivels.
If these implements are left outside, it probably wouldn't hurt to spray them occasionally (prevent rust).
You can use a spray white grease and give the swivels a good shot. I've done this with a very old (no idea of the brand, but wouldn't be surprised if it's older then I am) rear blade I've had for years...still swivels.
If these implements are left outside, it probably wouldn't hurt to spray them occasionally (prevent rust).
Last edited:
Egon
Epic Contributor
If you are really serious drop the blade and apply grease by hand.
CompactTractorFan
Super Member
Just use some WD-40...
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
That's actually a water displacement spray. Good stuff, but doesn't provide lasting lubrication.
sidewinder770
Member
Second the white lithium spray grease and I use a spray silicon grease to spray the whole thing with if I know it's not going to be used for some time and left outside.
Egon
Epic Contributor
If you have access to some Cylesso use that. It's kinda stick and spreads over everything quite well.:laughing:
CompactTractorFan
Super Member
Well, it is a "light lubricant", but I guess the spray grease would be best. I've never used any before...
lzicc
Platinum Member
I thought about doing that, but the only thing that concerns me about lubricating the swivels, since they are not sealed, if you grease or oil it, it will attract dirt.
