OP
Bill_in_MI
Silver Member
herringchoker,
Yes, I see what you have done. I'm definately going to go a similar route. I'll look at my layout to see whether the holes through the sheet metal are something to consider. I have to finalize the location of the valve first. Thanks for the photos and info. I was guessing 3/8 pipe threads.
Yes, I see what you have done. I'm definately going to go a similar route. I'll look at my layout to see whether the holes through the sheet metal are something to consider. I have to finalize the location of the valve first. Thanks for the photos and info. I was guessing 3/8 pipe threads.