Rear remote question 4044

[sparker133]

I want to add 3rd, 4th and 5th hydraulics to my new 4044r with a cab. I have been searching to see how hard it is to do myself. I figured it is just quicker to ask if anyone has links to forums about adding them, and part numbers I may need

I am mechanically inclined and grew up with heavy equipment but I am trying to figure out if I have the time to do it and how much is involved or is worth what the dealer wants to charge.

I am looking to do the 3rd for front and rear run off the loader joystick then the other two by adding the levers in the cab to control. I current tractor has them where I hit a button and they work off the joystick and I dont like it.

Any information is appreciated thanks

 

[K5lwq]

This is the simplest way to add more remotes but it does require flipping switches. This one turns one remote into three. You just flip the switch for the remote you need to adjust. The toughest part of adding separate valves in a cab will be the linkage.

Hydraulic Multiplier Kit, 3 Circuit Selector Valve Including Couplers and Switch Box Control

Hydraulic Multiplier Kit, 3 Circuit Selector Valve Including Couplers and Switch Box Control

summit-hydraulics.com

 

[RoyJackson]

Good Works Tractors (on YouTube) also has a good video on remotes (installed on a 4066)

 

[Beaver Cove Deere]

I found it a lot easier to install electric remotes of my single rear outputs but I do wish I had the factory installed option just not at the cost they demand.

 

[RoyJackson]

I found it a lot easier to install electric remotes of my single rear outputs but I do wish I had the factory installed option just not at the cost they demand.

I want to add 3rd, 4th and 5th remotes...but it would cost north of $5K if dealer installed. I might have got a better deal if I ordered them before the tractor was delivered. My 4052R was a used tractor, so maybe not...
My only option is the multiplier...

 

[beenthere]

Check out Surplus Center. They have different ones.