n6ckv
Bronze Member
I initially got a rear scoop for my Kubota, but after getting a FEL I no longer used the rear scoop.
I have been following the ideas on rock removal, I have rocks from fist size on up. After I till I use a rake to windrow the rocks, but I had no good way to seperate the dirt from thre rocks in the windrows.
So back to the rear scoop, I cut out the bottom leaving a 2" flange around the hole. I have welded some re-bar in rows about 1 1/2 inches apart. Hopefully this will work as a rock scoop. When I get a chance to use it later this summer I will let the group know how well it works.
carl
I have been following the ideas on rock removal, I have rocks from fist size on up. After I till I use a rake to windrow the rocks, but I had no good way to seperate the dirt from thre rocks in the windrows.
So back to the rear scoop, I cut out the bottom leaving a 2" flange around the hole. I have welded some re-bar in rows about 1 1/2 inches apart. Hopefully this will work as a rock scoop. When I get a chance to use it later this summer I will let the group know how well it works.
carl
