I own a B7510 and want to put on some sort of rear view mirror and cup holder! I can't turn and look behind me like I used to and a rear view mirror would really be helpful. Also some sort of cup holder would be nice. Any ideas? Places to get them?
Rear view mirror and cup holder??
- Thread starter Ezzrider
- Start date
- Views: 2434
Bigfoot62
Veteran Member
- Joined
- Aug 5, 2008
- Messages
- 2,478
- Location
- W. Central Louisiana
- Tractor
- JD 5090M; JD 5085M; JD 5083E; NH TN70A; Ford 2600
This ought to take care of the cupholder: Bar Buoy
You can buy them at most marine dealerships. They should have rear view mirrors there also. (like those for ski boats)
You can buy them at most marine dealerships. They should have rear view mirrors there also. (like those for ski boats)
Thanks. I have a West Marine not too far from my house. I will give them a try. Just need to figure out where to mount them.
art
Super Member
Many auto/truck parts stores have a good selection of universal mirrors and cup holders.
You might want to look at your loader towers as a good base for a mirror as well as the cup holder.
You might want to look at your loader towers as a good base for a mirror as well as the cup holder.
weldermike
Platinum Member
- Joined
- Jun 18, 2011
- Messages
- 599
- Tractor
- kubota L4400
My L4400 came with a cup holder in the fender, talk to your dealer and maybe you can get a factory one. Than you can tape off the fender, mark with a pencil and trim it out. Mine just snaps in. Nice in the fender and out of the way.
BXinNH
Silver Member
I added a universal mount truck mirror to the left side loader tower on my BX. It has worked out nicely. I'll try to get a picture if you it would help you.
Matt.
Matt.
