Rebuild kit source - need help.... bad!!!

[DiskDoctr]

"We have detected that you are not using Microsoft Internet Explorer 8.
Currently our website is optimized for Microsoft Internet Explorer 8 only."

They have to be losing a LOT of business because of this....

Wow. More likely their intent was to offer the MS-induced warning to upgrade browsers from IE6 due to certain issues. A number of sites have done this.

I am really hoping it was just poorly implemented, not allowing FireFox or others.

Try these guys. I use their local store. Allied Seals Orings, Cord Stock, Square, Lathe, Spliced, Viton

- JC

 

[drydock26]

Wow. More likely their intent was to offer the MS-induced warning to upgrade browsers from IE6 due to certain issues. A number of sites have done this.

I am really hoping it was just poorly implemented, not allowing FireFox or others.

Try these guys. I use their local store. Allied Seals Orings, Cord Stock, Square, Lathe, Spliced, Viton

- JC

Thanks. Sent a kit down last week - should know soon if it works. If not, I will give them a shout.

 

[Steve Bosshard]

Radioman is right on target - replacement seals / O rings are very inexpensive - I provisioned parts for 3 cylinders for $13. The trick will be to open the cylinder and have a high resolution photo and accurate measurements of the innards. We have a local Quality Hydraulics business that repairs and builds cylinders - really sharp folks. Best success, steve

 

[drydock26]

The trick will be to open the cylinder and have a high resolution photo and accurate measurements of the innards.

And therein lies the rub...........