Recommendation for 3-point forks

[dadohead]

My rear forks are Rankin.

3-Point Fork

Heavy made, good welds, and nicely finished... handles my 32 wood pods well. Quik-tach ready. Prolly not the cheapest.

 

[Speedybon2543]

That carryall frame from Tractor Supply was one of my top attachments. I purchased Pats quick hitch, and you can do so many different things. The only thing using a trailer hitch does travel around a lot of side to side, Play within the three point. I have rear pallet forks, and I don’t use them that much, they are a lot of trouble and heavy.

 

[Equatorial Malaise]

I recently purchased these. Haven't used them a whole lot yet but they are very well built

Pallet Forks For 3-Pt Hitch & Front-End Loader GWT Versaforks

Buy the best pallet forks on the market for your John Deere or Kubota tractor. Versaforks mount on the loader or 3-point hitch! Delivery included.

www.goodworkstractors.com

I just had a set of these delivered last week. Haven't had a chance to use them yet.

 

[CalG]

I just had a set of these delivered last week. Haven't had a chance to use them yet.

Looking at the product page...

What application would call for additional suit case weights on a set of front end forks?

I can't imagine...

 

[jigs_n_fixtures]

Looking at the product page...

What application would call for additional suit case weights on a set of front end forks?

I can't imagine...

When you have the forks mounted on the front and want to lift heavy items on the 3-pt.

 

[Fallon]

I was moving a stock panel with my former L3200 years ago. Pallet forks + the 100, maybe 200lbs panel. In 2wd & went down the slope behind the barn. Cut to some panic with the go pedal & brakes not doing anything & some pallet forks sized holes in the tin.

Always have an implement on your 3pt when using the loader folks. Otherwise the rears won't have enough traction. If the rears don't have enough traction, you are also putting excessive stress on your front axle. Putting it in 4wd would have gotten me traction, but still put excessive weight on the front axle

 

[jigs_n_fixtures]

I saw a SSQA fork mount, which had the tabs on it to attach to the 3-point hitch. Can remember who was selling it.