Regen delete kit

[MinnesotaEric]

since excessive regens is an issue I'm having, I do hope delete kits become available in the near future, so once the warranty is up, the whole thing can go.

What did you do on or to your LS Tractor today?

My dealer provided me with all of the manuals. Not sure if web site or what. I know I have them all on my computer.

www.tractorbynet.com

The field fix is to put in a warmer thermostat. The tractor warms up and stays warm leading to less regen cycles. Had to do it to my own tractor.

 

[GRoll]

My LS has had some issues, and I have a small local dealer, I consider them more of a lawn mower dealer than a tractor dealer, but they have had no major problem getting parts and service has been very good. New ECU and multiple DPF sensors trying to correct a regen issue, some sort of electronic controller for an F21 error, and a HST drive to correct hydraulic whining.... Parts seem to take 2-3 weeks to come in, then we schedule a day/time for service.

Have you tried your New Holland dealer? My xr4046hc is 95% a NH Boomer. And the parts are cheaper at my NH dealer than my LS dealer.

 

[JCoastie]

I'll keep that in mind after the warranty period, thanks for the parts/price info.

 

[jaydee325]

Doubt there will ever be emission equipment delete kits for compact or subcompact tractors. Potential market is just too small to justify the R&D investment. Plus the potential liability issue concerning EPA compliance just makes this a non starter.

 

[LouNY]

If they are they will be from some other country to escape the epa.

 

[mark.cash1964]

Have you tried your New Holland dealer? My xr4046hc is 95% a NH Boomer. And the parts are cheaper at my NH dealer than my LS dealer.

For everyone looking for the New Holland part to fit their LS. All New Holland part numbers are the same as the LS part numbers, but you have to start with the letters MT infront of your LS part number. LS # 40254855 is equal to NH # MT40254855.

 

[mark.cash1964]

Doubt there will ever be emission equipment delete kits for compact or subcompact tractors. Potential market is just too small to justify the R&D investment. Plus the potential liability issue concerning EPA compliance just makes this a non starter.

There is a delete kit already.

 

[mark.cash1964]

There is a delete kit already.

Send me a private message and I'll tell you what my dealer does.

 

[Robertk2946]

Interested also ? I got a XR3037C dealer says $2000 for the air pump after I replace the wiring harness it burned up

 

[mark.cash1964]

My local tractor dealer told me to take a piece off 3/8 pipe and sharpen 1 end. Drive it thru the ceramic catalyst filter about 3 times. That let's all of the sensors work as they should. The tractor will smoke black when you work it hard just like tractors use to do. But the computer will never see a back pressure in the catalyst filter so it will never go into regen. He says his older farmers who farm small farms do this as it's about $2,000 to change out the regen catalyst filter when it stops up or goes bad. I haven't done it, but from the way regen works it sounds like it's a perfect solution.

Also don't forget when it comes to purchasing parts for an LS, purchase the part from New Holland dealer. It's the same tractor up to 50 hp. Just add the letters MT infront of the LS part number. You get the same part at a better price.