Remotes for Remotes

[Scozz]

Standard bolts are stamped with 3 or 5 lines on the bolt head. Metric are stamped with numbers 5.5 or 8.8 etc. These are the grade of the bolt but makes for easy identification if it is Standard or Metric /forums/images/graemlins/wink.gif

 

[rswyan]

Ok. Got the mount bolted down, the ROPS retorqued to proper spec, and commenced to routing the hoses. I'm using standard length (36" 48") NPTF hoses from TSC.

 

[rswyan]

Looking down into the seat well.

 

[rswyan]

The return line hook up.

 

[rswyan]

From another angle.

 

[rswyan]

Connections to the valve.

 

[rswyan]

Due to the valves location (near the operator, and since the lines get hot I thought it would be a good idea to wrap the lines in something. I also didn't want the hoses rubbing against anything and abraiding.

 

[rswyan]

Top view, down into the seat well.

 

[rswyan]

Left side.

 

[rswyan]

Return line hooked into a JIC run tee with the return line from the FEL now hooked back up.