Removing stuck grease nipple from grease gun
- Thread starter Don1025
- Start date
- Views: 15366
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,616
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
:welcome:
Pliers or channel locks or vise grips (or put the nipple in a vise)
That is if it isn't broken off.
Pliers or channel locks or vise grips (or put the nipple in a vise)
That is if it isn't broken off.
Chilly807
Elite Member
On some (most?) grease guns, the tip is in two pieces. When you turn the outer end counterclockwise it loosens the grip the tip has on the nipple. Not all guns have this feature, but Lincolns do for one. There are some threads here on this subject, do a search for grease gun.
Sean
Sean
davygp38
Gold Member
Head for the vise.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
yep.. if not an adjustable tip.. use the vice.
soundguy
soundguy
