Replacement Shanks for Woods Roll over box blade

[VAWoods]

Can anyone provide information on where to get replacement shanks, teeth and the locking pin for a Woods R1048 Roll-over box blade? I can call our local dealer, but we all know that will be big $$. I could also use a 1/2" x 6" x 48" cutting blade for the unit.

 

[HomeBrew2]

Don't know the way your's attach but, AgriSupply has two types and lengths, cheap. Shipping is cheap, based on $ not weight. The teeth are tack-welded, not pinned. I use them and the work well.
Cheers!

 

[MX5000]

</font><font color="blue" class="small">( Can anyone provide information on where to get replacement shanks, teeth and the locking pin for a Woods R1048 Roll-over box blade? I can call our local dealer, but we all know that will be big $$. I could also use a 1/2" x 6" x 48" cutting blade for the unit. )</font>


That's a really nice boxblade. If you don't mind my asking, How much does one of those go for? I've been kicking around buying a rollover boxblade>

Thanks,
Howard

 

[VAWoods]

The blade I have came with the tractor, which I bought used. I guess it would normally cost $1,000 - $1,500. The parts I bought from the dealer are steep. The shanks cost $32 (x5), the locking pin $38 and the replacement blade-edge $60. It sure is handy, I graded a playset area for the kids over the weekend.

 

[KYDan]

This is an ancient thread, but I have a Dirt Dog Rollover box blade and I have broken several shanks and Dirt Dog is out of them. I am looking at some Agri Supply shanks and debating about trying one. They are not as heavy, less width, but they have 4 holes and I am hoping to make them work. Has anyone else had this issue and if they were able to resolve it I would appreciate a response.