eray1066
Bronze Member
- Joined
- Jun 2, 2009
- Messages
- 71
- Location
- RI, MA
- Tractor
- Challenger MT285B, Kubota L4150 , Farmall super A, Farmall Cub
I needed to remove the blades and the Clamp Crossbar that the blades attach to. The parts had all been on since 1990. I was able to remove the Clamp crossbar by putting threaded 1" rod in the holes of the crossbar and using a 24" pipe wrench turn the nuts to push the part off the main shaft.