Resurrected rear blade.

   / Resurrected rear blade. #1  

varmint

Elite Member
Joined
Mar 17, 2003
Messages
2,570
Location
Northern Maryland
Tractor
Kubota B8200, then a Kubota L3130 HST, now a Kubota L3400 HST
Some of you may recall I posted photos of an old 72" rear blade I had acquired, asking for help in identifying it. After using it, I tore it apart and cleaned it up, primed and painted it, and installed refurbished and some new hardware- the old bits and pieces were rusted, worn and no longer staying tight and letting it wiggle and rattle way too much.
I got ambitious and installed a grease fitting for the pivot, and fabbed a support stand for storage. Not knowing its original maker, I went with old style Kubota orange (I had some rattle cans left over) and stuck a brown John Deere decal on it. Some before and after photos...

P1010787.jpgP1010808.jpgP1010809.jpgP1010810.jpg
 
   / Resurrected rear blade. #2  
Looks great. I almost always rebuild things I buy and have never regretted it. If you can buy cheap enough and buy the right item, you can have fun and maybe pocket a couple of $$ along the way.
 
   / Resurrected rear blade. #3  
Swap the lettering to say "Don Jeere" so someone years from now doesn't try to find the history of this unknown model JD blade, or try to sell it at double the true value.

:)

Bruce
 
 

Tractor & Equipment Auctions

42x16 Rim (A46502)
42x16 Rim (A46502)
110 Gallon Antifreeze Tank (A47369)
110 Gallon...
2025 Safety Basket Forklift Attachment (A46683)
2025 Safety Basket...
Wright Stander X (A44501)
Wright Stander X...
JCB 260T Track Skid Steer (A46502)
JCB 260T Track...
2025 Swict 72in Bucket Skid Steer Attachment (A46683)
2025 Swict 72in...
 
Top