Rotary Cutter rhino fr15 flex wing
- Thread starter johnvickl
- Start date
- Views: 6093
radman1
Elite Member
- Joined
- Jul 8, 2006
- Messages
- 3,017
- Location
- midwest
- Tractor
- JD 4520, Toolcat 5610, Bobcat S300, Case-IH 125 Pro, Case-IH 245, IH 1086, IH 806
The answer should be yes. I am not specifically familiar with that mower. However, on most batwing mowers, there should be a pair (2) hoses for the main lift cylinder, which is in most cases a 2 way cylinder. This will occupy 1 set (pair) of your tractor hydraulic couplers. The other single hose should go to the rear of the mower and will split with a "T" into a single hose for each wing cylinder, which are usually 1 way cylinders. This single hose will go into only one of the remaining pair of hydraulic outlets. The wings usually go down by gravity and therefore only require a 1 way cylinder.
On many batwings, there may be an optional individual hose for each wing cylinder and each wing can be operated by a separate tractor hydraulic. If this was the case with your mower, you would see 4 hoses and it would require 3 pairs of rear tractor hydraulics- one pair of oultets for the main lift cylinder and 1 separate outlet for each wing.
On many batwings, there may be an optional individual hose for each wing cylinder and each wing can be operated by a separate tractor hydraulic. If this was the case with your mower, you would see 4 hoses and it would require 3 pairs of rear tractor hydraulics- one pair of oultets for the main lift cylinder and 1 separate outlet for each wing.
mlauk said:
Ok thanks I used a land pride 3315 had 2 hoses one for the mower up and down amd one for both wings. I just don't want to add another remote. I'm still looking for a batwing. Most people like rhino or bush hog. Checking on John Deere and modern ag predator don't know alot about modern ag