Rhino TW72 parts

STx · Apr 12, 2015

My Rhino TW72 started vibrating really badly and after looking it over, one of the blades isn't swinging and the hub is missing a piece. Of course, I'm at my property and need the mower working so I can get my dove field planted. Are these parts fairly interchangeable or will they be cutter specific? Do you guys think I'll be able to get it fixed in a day or so or am I probably screwed for this trip?

case580c · Nov 3, 2018

Did you ever find a parts source as I am looking for skid shoe assembly for my Rhino TW72 ?

The part number I have is from my parts manual, it is

Item 1, Part number 0622000001, Qty 2, Description Skid shoe (60 & 72).

STx · Nov 3, 2018

I ended up getting everything I needed at my local Lansdowne Moody. A larger tractor dealer that carries Rhino parts should be able to get you what you need.

My TW72 is good as new after the rebuild, I had to weld some plate over some thin spots but other than an occasional greasing, I just abuse it.

case580c · Nov 3, 2018

STx said:
I ended up getting everything I needed at my local Lansdowne Moody. A larger tractor dealer that carries Rhino parts should be able to get you what you need.

My TW72 is good as new after the rebuild, I had to weld some plate over some things spots but other than an occasional greasing, I just abuse it.

Yes me too, I give it all my tractor will take. I just finished mowing 4 to 5 inch brush Have slip clutch adjusted just about right. The old TW72 are beasts. I had an old Brush hog years ago pulled it with my Cat RD4 When I came to Big Sage Brush with main stump 6 to 8 inches I would just run over it with my track to knock it down and then pull the hog over it. Only problem I ever had with it was it had 2 auto type tires, once I didn't see the old homesteaders Chicken wire on the ground and man the mower turned the wire into many 4 to 6 inch straight an an arrow and I had 20 or more little wire arrows sticking in my tires had to replace the tubes. The good old days in the hot desert sun.

Thanks will try a few more dealerships Thanks

STx · Nov 4, 2018

If that doesn't work, try calling Rhino direct, they might be able to help. Their parts number is 800-446-5158.

Good luck! I bet that the thing that finally does these in will be lack of repair parts.