Rigging a snow blower

   / Rigging a snow blower #1  

llewellynsd

Member
Joined
Mar 27, 2002
Messages
48
Location
Western Maryland
Tractor
Sath S-370
Hey guys & gals help me here,
I've got a gravely snow blower that I've been unsuccessful in selling. Instead of pratically giving it away I was going to try to make a three point bracket and if it rotates in the correct direction mount it on the back of my Satoh and run it off the PTO. Has this been tried before? It is not as wide as my tractors But I thought I could fabricate metal flares that as I pushed would direct the snow towards the center and into the blower. The biggest hurtle is the attchment onto the 3 point spline.

Thoughts?

Thanks Shawn
 
   / Rigging a snow blower #2  
You might consider a way to mount a slip clutch on the implement end of a pto shaft and to the blower.
 

Tractor & Equipment Auctions

2013 HINO 388 (A50854)
2013 HINO 388 (A50854)
2015 International DuraStar 4300 Street Sweeper Truck (A50323)
2015 International...
2021 Doyle 8 Ton Trailer Tender (A51039)
2021 Doyle 8 Ton...
Bron V75-3 Pull-Behind Hydraulic Vibratory Utility Plow (A49461)
Bron V75-3...
2014 Ford Taurus Sedan (A50324)
2014 Ford Taurus...
HUSKY 135 PSI AIR COMPRESSOR (A50854)
HUSKY 135 PSI AIR...
 
Top