RK 24 FEL joystick.

[Ohio RK24]

I am wondering if anyone else has had the FEL Joystick become very lose and floppy in one of the 4 directions, working at moving felled tree sections to the burn pile, at the end of the day refueling tractor and doing a walk around check I found that indeed my joy stick is floppy in one direction. the loader still seems to function.
So I am wondering if anyone has ran into this issue and how you went about correcting it, it appears that the 4 hex head bolts hold the assembly together but I haven't ventured int it yet, I thought it wise to seek a little wisdom before applying
hillbilly ingenuity to the situation.
Thanks for the help in advance.

 

[modelaway]

Yes my RK 24 loader joystick started getting very loose and sloppy in the curl/dump positions at around 35-40 hrs.
pull the rubber boot up and you'll find the nuts for the little spool valves have loosened up or in my case one nut had come off completely
but the boot kept it from falling out and getting lost.
I just spun the nut back on and tightened everything up and it's been fine.Also check the allen head cap screws on the flange that the joystick handle threads into.

 

[Ohio RK24]

Modelaway,
thanks for the info, I did as you instructed and it was indeed a nut that had loosened considerably. Since I was in there any way I decided to grease up the pivots and checked all of the nuts for tightness.
Have a good evening.

Yes my RK 24 loader joystick started getting very loose and sloppy in the curl/dump positions at around 35-40 hrs.
pull the rubber boot up and you'll find the nuts for the little spool valves have loosened up or in my case one nut had come off completely
but the boot kept it from falling out and getting lost.
I just spun the nut back on and tightened everything up and it's been fine.Also check the allen head cap screws on the flange that the joystick handle threads into.

 

[modelaway]

Glad it's fixed! I'm gonna put 3 hrs. or so on mine tomorrow skidding some dead ash trees out of the woods then running the bush hog.
Enjoy your tractor!

 

[Ohio RK24]

It sounds like we are in the same boat, I just finished cleaning up after having dropped two cottonwoods ( 75'and 80", 32" and 34" diameter )
then I had to drop a couple smaller 40" maples that got damaged in a storm.
Makes very thankful to have the tractor to work with, next I am on to repairing fence damaged by falling tree's and limbs.

 

[modelaway]

wow= those were good size cottonwoods.
I've got several cottonwoods also.Kind of nuisance trees as they get tall and old.
I burn them in the shop woodstove along with the ash wood.
Sound like your "24" gets a good workout which is good for it!

 

[Myz28u]

Mine has started to get a little loose on my RK24. I’ve got 96 hours on it. I may try to tighten it up this weekend.
It’s had a pretty tough 90hrs digging stumps with the Artillian front hoe bucket. I’m surprised it isn’t super sloppy already.

 

[modelaway]

It seems this is a common problem with joystick controls, not just on our RK 24's.
It's really easy to check and correct.
I've got about 55 hrs. on mine and just did the 50 hr. service at 49 hrs.
Time to really put it to work- lots of projects.
I have a Piranha tooth bar on the bucket and have dug out 5 stumps so far, but that Artillian front hoe sounds interesting.

 

[Myz28u]

It seems this is a common problem with joystick controls, not just on our RK 24's.
It's really easy to check and correct.
I've got about 55 hrs. on mine and just did the 50 hr. service at 49 hrs.
Time to really put it to work- lots of projects.
I have a Piranha tooth bar on the bucket and have dug out 5 stumps so far, but that Artillian front hoe sounds interesting.

I’ve been very impressed with the front hoe. It does a pretty good job digging stumps.

 

[modelaway]

That's impressive!!

 

[RnkJ24]

This is the issue with my RK24 joystick. The bottom left bracket broke off, and allows the joystick to slip off of the top pin, rendering the bucket unusable. I'm trying to get info from RK, but even when the tractor was under warranty, their response was less than stellar. That aside, I doubt this would be covered under warranty. I'm wondering if anyone knows of a replacement that will work for this?

 

[WoodKnot]

View attachment 714581View attachment 714581This is the issue with my RK24 joystick. The bottom left bracket broke off, and allows the joystick to slip off of the top pin, rendering the bucket unusable. I'm trying to get info from RK, but even when the tractor was under warranty, their response was less than stellar. That aside, I doubt this would be covered under warranty. I'm wondering if anyone knows of a replacement that will work for this?

I just experienced the same issue. It looks like the picture shows a repair in progress. How did it work out?
I'll up date my progress.
Around 60 hours I experienced what the others commented on with the loose knuckles. I at 290 hours with this issue.

Happy Tractoring !

 

[Silvertruck07]

I am experiencing the same problem but mine fell out and I can’t find it. According to the manual it is called a wrench bolt,part#WBM0625 where can I buy them?