JLH4
Silver Member
Has anyone put wheel spacers on a RK 24? Can the rims be reversed and would that make any difference?
Thanks, Joe
Thanks, Joe
Tires RK 24 wheel spacers
- Thread starter JLH4
- Start date
- Views: 6518
dmklein
New member
Dosen't look like you got any responses, I was wondering if you tried putting spacers on.
OP
JLH4
Silver Member
I haven't tried yet, don't know enough about them to experiment. Checking with TYM sites for info.
TangoYankee
New member
- Joined
- Sep 8, 2019
- Messages
- 6
- Tractor
- Rural King RK24 and IH 404
After measuring my rear wheels on my RK-24 I found that swapping the wheels from one side to the other would only gain about an inch on each side. I went ahead and tried it since I had it up on blocks while doing my 50-hour service, but it really didn't make any difference. I've been looking but haven't found any spacers specifically for the RK-24 yet and haven't yet tried looking for them based on measurements.
nforktractor
Silver Member
I have some brand new Bora 4" rear wheel spacers, for 6 lug wheels, I had purchased a pair for a John Deere 3025e deal that fell through. Spacing might be the same. Paid $400 for the pair, and would be willing to sell and ship for $250. If you want to take some measurements, I can compare with the wheel spacers.
