candersen10
Gold Member
- Joined
- Mar 27, 2007
- Messages
- 303
- Location
- Phoenixville, PA
- Tractor
- Cat 262c, NH TN75, JD 6430 premium, JD 5325, Kubota BX2200, Ford 1710HC, JD 333E, JD3720, Farmall 504, Farmall 404.
Hello, I am working to build a robot for farmers to replace some of those tasks where you'd otherwise jump in and out of a tractor, or have to tow around a wagon. Here is a video of an early prototype: Augean Robotics (AGR) Following Cart Prototype - YouTube.
What do people think about this? The product is a robotic cart that follows the user, and can also return to a specified point on command. On my orchard, it would be very useful for harvesting apples, and also for spreading mulch (as shown in the video) and in other tasks where I'd otherwise be jumping into/out of a skid steer to spread small bits of material or collect objects.
The cart will be built out of aluminum so will not corrode, and should weigh about 100 pounds and be able to carry 250 pounds or so (at least several bushels of apples).
Any thoughts or feedback on the idea? What might you pay for something like this? Any applications people can think of?
What do people think about this? The product is a robotic cart that follows the user, and can also return to a specified point on command. On my orchard, it would be very useful for harvesting apples, and also for spreading mulch (as shown in the video) and in other tasks where I'd otherwise be jumping into/out of a skid steer to spread small bits of material or collect objects.
The cart will be built out of aluminum so will not corrode, and should weigh about 100 pounds and be able to carry 250 pounds or so (at least several bushels of apples).
Any thoughts or feedback on the idea? What might you pay for something like this? Any applications people can think of?