rollback force on bucket

[oldphart]

i notiche rollback force on the early toolcats in the specs was 970 at 88 degrees and the newer toolcats was like 1200 at 30 degrees. is the rollback on the early machines the same at 30 degrees tilt?

 

[Xfaxman]

I guess nobody knows. The booms are different on the newer machines. I have never had a problem with rollback force on the F or G Series.

Did you get a Toolcat?

 

[oldphart]

I guess nobody knows. The booms are different on the newer machines. I have never had a problem with rollback force on the F or G Series.

Did you get a Toolcat?

Thanks. no i didn't buy it although i did give it a second chance. the dealer still has it in the un repaired condition. probably needs drive motors and i can't get the price down to a level to be able to repair it. i will keep watching the used market until i find one. i have learned quite a bit though.

 

[ruffdog]

I was watching the used market for a few years and then I found a year old that was used by a school. Good-bye NH and Kubota...hello toolcat.

Keep your eyes open!

 

[Xfaxman]

Re: rollback force on SSQA

Just for future info seekers on rollback, forks and frame weigh 715 pounds, total weight on SSQA is 1847 pounds. About 3 feet out to the center of the 5x6 bale.

G series rolled it back no problem and no counter weight on the 3 point hitch:

 

[Xfaxman]

Some more rollback pictures, this time on the F series.

The 7' wide, 1800 pound brush hog: