Rotella 5/40 synthetic

   / Rotella 5/40 synthetic #1  

BBELL

Bronze Member
Joined
Aug 20, 2003
Messages
79
Location
Maine
Tractor
Kubota L-4310 GST/ 1979 Ford 1700
I just put Rotella 5/40 weight, that's the only weight I could get. Is it ok, or is the 5 weight to low?
 
   / Rotella 5/40 synthetic #2  
I'm running it in both of my diesels. Great cold weather starting. At running temps it's a 40 weight. You're fine.
 
   / Rotella 5/40 synthetic #3  
Based on the pour point (-40 C). unless it get close to -20, you would be fine. It depends on how far into Maine you are. Might be good, might not be. If you use a block heater you are fine.

I know in my part of Taxachusetts we see up to -10 below & colder in some parts. For me Rotella (a dino oil), would not work to well since you are getting close to the boarder line pumping temp.

I have block heater but never use it since I never remember. For me, you should not need one unless you livewhere the temps are so low...you get the point.
 

Tractor & Equipment Auctions

2019 CATERPILLAR 740GC OFF ROAD DUMP TRUCK (A52705)
2019 CATERPILLAR...
Chevrolet C8500 Flat Bed with a Moffet Kit (A55218)
Chevrolet C8500...
2019 Krause 8005-30 Excelerator - High Speed Vertical Tillage - 30 FT Working Width (A55302)
2019 Krause...
2019 BOBCAT T630 COMPACT SKID STEER TRACK LOADER (A55218)
2019 BOBCAT T630...
2004 JOHNSTON STREET SWEEPER (A54313)
2004 JOHNSTON...
2021 Freightliner Cascadia 116 T/A Day Cab Truck Tractor (A52377)
2021 Freightliner...
 
Top