Rip
Platinum Member
Check out www.utilityoffroad.com "Staging Area" and "Rhino Tech" sections and look back the past several months for a number of first hand reports of Rhino roll overs and injuries. Other ATV sites have reported them as well and the Rhino stands out above any of the other side-by-sides models for this issue.
The machine itself usually survives with minimal damage, it is the flying limbs (or bodies if not wearing the seatbelt) that suffer, and legs and feet seem the most prone.
There are also several owner-built leg guards described and shown and one of their site sponsors ( www.atvoutfitters.com ) now sells a set of "half doors" that looks like a viable solution as well.
Tailgate webbing or similar would be inexpensive and pretty easy to rig up without welding and only a few screw holes to drill. Could do it as a half door only or even full up to keep everything inside where it belongs.
The Mules, Gators, RUVs, and similar are not in the same catagory as the Rhino in terms of Center of Gravity, width, and tires. With the emphasis on "recreation" the Rhino is much more "sporty" and nimble, but unfortunately also prone to roll over. Don't forget the Rhino will also do 40 MPH.
The Rangers (I have a Ranger 6x6) fall in between the Rhino and the other true utility vehicles with much better suspension and more ground clearance than the Uts but less than the Rhino and are 7" wider wheel track (60" overall) as well.
While the Rhino has about 53" wheel track, it is more top heavy in proportion to a regular ATV with only 48" wide tire track. This is not to say they all roll over, but that even when aware of the tendency, a disproportionate number seem to catch their driver (or passenger) by surprise with serious injury resulting.
A decent leg guard should minimize this risk to a great extent and allow everyone to enjoy what is undisputedly a fun and capable machine.
Take care and have a fun ride!!
The machine itself usually survives with minimal damage, it is the flying limbs (or bodies if not wearing the seatbelt) that suffer, and legs and feet seem the most prone.
There are also several owner-built leg guards described and shown and one of their site sponsors ( www.atvoutfitters.com ) now sells a set of "half doors" that looks like a viable solution as well.
Tailgate webbing or similar would be inexpensive and pretty easy to rig up without welding and only a few screw holes to drill. Could do it as a half door only or even full up to keep everything inside where it belongs.
The Mules, Gators, RUVs, and similar are not in the same catagory as the Rhino in terms of Center of Gravity, width, and tires. With the emphasis on "recreation" the Rhino is much more "sporty" and nimble, but unfortunately also prone to roll over. Don't forget the Rhino will also do 40 MPH.
The Rangers (I have a Ranger 6x6) fall in between the Rhino and the other true utility vehicles with much better suspension and more ground clearance than the Uts but less than the Rhino and are 7" wider wheel track (60" overall) as well.
While the Rhino has about 53" wheel track, it is more top heavy in proportion to a regular ATV with only 48" wide tire track. This is not to say they all roll over, but that even when aware of the tendency, a disproportionate number seem to catch their driver (or passenger) by surprise with serious injury resulting.
A decent leg guard should minimize this risk to a great extent and allow everyone to enjoy what is undisputedly a fun and capable machine.
Take care and have a fun ride!!