RX 75 problem

mns · Apr 22, 2009

Bought my Dad a RX75 that he used on a small lot a few times. Suddenly it quit moving (forward or backward). The motor, belts, and pulleys look fine. I believe something went out in the axle. Any help or suggestions would be appreciated. Is their parts available? Thanks

Rob-D · Apr 23, 2009

I bought one last year for Nancy. Great little machine she runs it all over, better then a lawn tractor for mowing.
Here's the story. I got it from a guy who said the tranny was bad. Sure enough I can't move it. Pulled the back wheels and found one side had a key on the shaft missing from when someone changed a flat tire.(It must have slipped out) Put in a new key and away she went!

Rob

mns · Apr 24, 2009

I'll check it. We did put a tube in the rear before it went out. Thanks

wheels910 · Apr 24, 2009

are you sure you checked all 3 belts. there are 2 traction drive belts tucked and hidden away between the frame members. not calling you stupid, most people don't realize there are 3 belts.

Rob-D · Apr 25, 2009

It's easy for the pin to fall out and for you not to notice it when putting the tire back on. Also check BOTH sides.

Sometimes times the wheel is tight when you put it back on so the tranny runs fine for awhile.

best,
Rob