SA424 Hood

/ SA424 Hood #1  

MACflyer

Bronze Member
Joined
Mar 16, 2021
Messages
72
Location
West Virginia
Tractor
Yanmar SA424
Before I get too creative with the duct tape, does anyone know of anywhere to get used parts for these tractors?

My hood has broken, and the dealer quoted me $768 for a new one. Needless to say, I'm going to cobble it back together and then just have to manually pull the whole thing off anytime I need to get under it (the are supported by the gas strut will never bear any load again). Unless I could find a reasonably priced one to pull off a parts machine or something of that nature.
 
/ SA424 Hood #2  
Just what broke????

The hydraulic lifts for a truck hood should work??

willy
 
/ SA424 Hood #3  
How old is it? Dealer/Yanmar should replace free if still under warranty. Also would contact Yanmar directly if out of bumper to bumper warranty as they might replace free anyway since it's a common issue
 
/ SA424 Hood
  • Thread Starter
#4  
Just what broke????

The hydraulic lifts for a truck hood should work??

willy
No, the entire plastic shell broke unfortunately.
 

Attachments

  • PXL_20230410_181938194.jpg
    PXL_20230410_181938194.jpg
    2.2 MB · Views: 352
  • PXL_20230410_182048407.jpg
    PXL_20230410_182048407.jpg
    3.2 MB · Views: 341
/ SA424 Hood
  • Thread Starter
#5  
How old is it? Dealer/Yanmar should replace free if still under warranty. Also would contact Yanmar directly if out of bumper to bumper warranty as they might replace free anyway since it's a common issue
I bought it new almost exactly 2 years ago. I didn't know this was a common issue, but certainly makes sense given the flimsy design.
 
/ SA424 Hood #6  
I would try using bondo or fiberglass to repair it
they have fiberglass kits with the glass matt
to make an easy repair

willy
 
/ SA424 Hood #7  
My hood just **** the bed. 950 hours was all it could handle. I have a crack around the gas cap hole which is new but I’ve struggled with the screw nubs from the beginning. I will layer fiberglass & jb weld so i can get another 950 hours. 🤞
 
/ SA424 Hood
  • Thread Starter
#8  
My dealer is going to replace it under warranty. It is definitely a poor design, the support screws are far too close together to support the weight of the whole hood. I only had 335 hours on it when it broke.
 
/ SA424 Hood #9  
Wonder full news saves you a lot of hassle trying
to fix it your self
Somebody could have gotten the wrong hood to put
on your tractor

willy
 

Marketplace Items

2025 Fabrique 12' x 6' Dump Trailer (A62613)
2025 Fabrique 12'...
2017 International HX620 Quint Dump (A62613)
2017 International...
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
UNKNOWN  500BBL WHEELED FRAC TANK (A58214)
UNKNOWN 500BBL...
1987 FORD F-700 FUEL TRANSPORT TRUCK (A58214)
1987 FORD F-700...
SET OF (10) ACE CATTLE PANELS W/CONNECTION JOINTS (A60736)
SET OF (10) ACE...
 
Top