tpolley
New member
- Joined
- Mar 9, 2009
- Messages
- 23
i just inherited a john deere sabre 1742. what does the "reverse impliment option switch" do? the manual says how to use it but it doesn't say what it is or what it's for.
sabre 1742hs question
- Thread starter tpolley
- Start date
- Views: 1869
atschirner
Silver Member
The short answer it allows you to shift to reverse with the mower deck engaged.
As the story goes, Once apon a time in Missouri two small boys were injured when the operator of a riding mower backed over them with the deck running. Following the civil court judgement JD added the RIO switch.
Before you backup, look behind you for obstructions, or pets, pull up on the RIO to the detent and then press the reverse hydro pedal. Once you are moving in reverse you can release the switch.
If you forget, no damage; just turn off the PTO and restart the engine.
As the story goes, Once apon a time in Missouri two small boys were injured when the operator of a riding mower backed over them with the deck running. Following the civil court judgement JD added the RIO switch.
Before you backup, look behind you for obstructions, or pets, pull up on the RIO to the detent and then press the reverse hydro pedal. Once you are moving in reverse you can release the switch.
If you forget, no damage; just turn off the PTO and restart the engine.
