Safety switch

   / Safety switch #1  

cain99

New member
Joined
Mar 15, 2002
Messages
1
I recently purchased a ym2000 and found out unexpectedly that it will try to crank in gear. This seems to me to be an accident waiting to happen. I remember from reading old post that sometimes when someone was having trouble with their tractor not turning over that one suggestion was to check the switch mounted on the clutch pedal. (American sold Yanmars) My question is can this type device be easily installed on the greys? Thanks for any info.
 
   / Safety switch #2  
I'm sure it would be easy. It's just a switch on an angle bracket. If you want, I can look up where it goes in the wiring harness. Another place you will see the same switch is under the seat so you have to be sitting on the tractor to crank it.
 
   / Safety switch #3  
My YM2000B has a safety switch mounted under the clutch pedal. Of course that is a little later model than the 2000. Could it be there and just out of adjustment?
Norm
 
   / Safety switch #4  

Tractor & Equipment Auctions

New Wolverine Sid Steer 3PT Hitch Quick Connect (A59000)
New Wolverine Sid...
MARATHON 20KW GENERATOR (A55745)
MARATHON 20KW...
2015 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A58017)
2015 FREIGHTLINER...
SHOP FAN WELDING CART (3) JACK STANDS (A54757)
SHOP FAN WELDING...
New Wolverine 3Pt hitch Receiver (A59000)
New Wolverine 3Pt...
HELI 25 STRAIGHT MAST FORKLIFT (A52709)
HELI 25 STRAIGHT...
 
Top