Salsco Chipper for PTO

[Oaktruss]

I am interested in buying a new Salsco Chipper to run off the rear PTO of my Kioti CK35. WV dealers do not seem interested. Where is the best place to purchase? Or can I just buy factory direct?

 

[Sponge Bob]

I don't know about the "best" place to buy a Salsco in your area, but I copied the information below from the Salsco website. This might get you closer to where you need to be. I have a 627XT that I like. Hope that this info helps.

West Virginia

Anderson Equipment Company
Charleston, WV
304-756-2800
Anderson Equipment Company - Your Source for Quality New, Used & Rental Construction Equipment


--------------------------------------------------------------------------------

Anderson Equipment Company
Fairmont, WV
304-366-3075
Anderson Equipment Company - Your Source for Quality New, Used & Rental Construction Equipment


--------------------------------------------------------------------------------

Finch Services
North Huntingdon, PA
877-233-3373
Home | Finch Services, Inc. - John Deere Dealer for Maryland and Pennsylvania

*Only the following counties: Barbour, Braxton, Brooke, Calhoun, Doddridge, Grant, Gilmer, Hampshire, Hancock, Hardy, Harrison, Lewis, Marion, Marshall, Mineral, Monongalia, Ohio, Pleasants, Preston, Ritchie, Randolph, Taylor, Tucker, Tyler, Upshur, Wetzel, Wirt, and Wood.

 

[Happy Gilmore]

Ooops

 

[cmhyland]

I like the Salsco Chipper... I have the small 600 series and I think it's very well made....

 

[matoyan]

I like the Salsco Chipper... I have the small 600 series and I think it's very well made....

cmhyland,

interested in selling your chipper? I live in RI and I'm looking for a used one.

 

[Happy Gilmore]

I accidentally revived this old thread, thus the edited oops. In any event we have a 627xt and it is a solid machine. Works very well.

 

[Furu]

Continuing to run with an old post. I love my Salsco chipper. Fantastic unit. If anyone is interested in them they can be bought direct if a dealer is not nearby.

 

[escavader]

I've thought of selling mine just because I have to cut the crotches up so fine.its such a dependable unit I hate too I'd like to find a 6 or 8 that the bx will lift if I can get it turning id be good, I'm looking into modifying my hopper to expose a couple more inches of the head to solve the issue thus instead of 4 by 4 it would be say 6 by 4

 

[Happy Gilmore]

I'm thinking a 6" would be way too much for a BX. Our 627XT is a 6" machine and it's good size and heavy, weighing in at 1300lbs. They claim minimum 25hp at the PTO, I'm running 50hp to it at the PTO

 

[Timbersawz]

I've thought of selling mine just because I have to cut the crotches up so fine.its such a dependable unit I hate too I'd like to find a 6 or 8 that the bx will lift if I can get it turning id be good, I'm looking into modifying my hopper to expose a couple more inches of the head to solve the issue thus instead of 4 by 4 it would be say 6 by 4

with about 16hp at the pto you are unlikely to have the power to run a 6 inch very well. If you kept it super sharp and feed it carefully you might be okay, but I wouldnt count on it.