OP
mark in portugal
Silver Member
As stated above, I did find a manual.
Yes, I still have the Same; I changed the clutches, rear axle seals, installed 3point shaft bushings [had to bore the gear case!] changed the front axle bushing, rebuilt the steering cylinder [new end joints] and other things.
I think I had to consult the manual for torque settings on the clutch.
Yes, I still have the Same; I changed the clutches, rear axle seals, installed 3point shaft bushings [had to bore the gear case!] changed the front axle bushing, rebuilt the steering cylinder [new end joints] and other things.
I think I had to consult the manual for torque settings on the clutch.