Tiller Satoh 2PR-1100S Tiller Replacement Tines

[Leross]

Hey Yal' ... I'm new here, and have spent some time searching this Forum looking for any help in locating replacement "Tines" for my CCW early "80s Tiller that I just acquired with worn down "Tines" ... Each Tine bolts on independently with one bolt, and with using a Stanley tape, the connecting end seems to measure about 5/16 x 1" ... I took one off yesterday and presented it to a Kabota dealer for info on purchasing 28 each ... He chuckled at me, and stated that " these have not been in production for a number of years now" ... I have no idea of how long, or the type of bend each should have, if I were to begin the process of making them myself ...

Does anyone know where I could locate them for a Satoh 2PR-1100S Tiller? I will need 28 total, and I presume they would be 14 Right, and 14 Left bends... I'm not even certain of which direction they would need to be installed, due to that fact that the ones on the unit now have worn to just straight, stubby spikes ...

Thank you for any assistance ...

 

[z28clone]

Did you find replacement tines? I will need some too. Thanks.