satoh 650 brake springs

[gpb]

Anyone with any luck on getting return springs for brakes?--I tried NAPA with no luck.

 

[gpb]

Anyone with any luck on getting return springs for brakes?--I tried NAPA with no luck.

 

[Normmm]

Check out satoparts.com Also west kentucky tractor parts will most likely have used ones. If you are in a herry they can overnite to you but i recieve stuff in alabama in about 3 days. Some tractor dealers who sold international's will list then in their parts books. stocking is another thing. Good luck.

 

[Normmm]

Check out satoparts.com Also west kentucky tractor parts will most likely have used ones. If you are in a herry they can overnite to you but i recieve stuff in alabama in about 3 days. Some tractor dealers who sold international's will list then in their parts books. stocking is another thing. Good luck.

 

[gpb]

I have found a couple of places that can supply them. Valley Power in Roanoke, Va. and Southern Global tractors in Mississippi. Southern Global's price was about $33 per spring they had two. Valley Power was about $44 per spring. I'm going to try an International dealer. Also considering having custom wire springs made. I understand it's not that hard to do. $33 for a 3 1/2 inch spring seems a bit high. Allegheny lawn and golf supply in Pa. quoted in the $40 range and was ordering from Japan with 4 to 6 weeks waiting. I found them by looking up Mitsubishi US. There has got to be a better source. Anyone who has had reasonable success with this problem let me hear from you.

 

[gpb]

I have found a couple of places that can supply them. Valley Power in Roanoke, Va. and Southern Global tractors in Mississippi. Southern Global's price was about $33 per spring they had two. Valley Power was about $44 per spring. I'm going to try an International dealer. Also considering having custom wire springs made. I understand it's not that hard to do. $33 for a 3 1/2 inch spring seems a bit high. Allegheny lawn and golf supply in Pa. quoted in the $40 range and was ordering from Japan with 4 to 6 weeks waiting. I found them by looking up Mitsubishi US. There has got to be a better source. Anyone who has had reasonable success with this problem let me hear from you.

 

[Normmm]

Using th3e word "Mitsubishi" when buying anything doubles the price.

 

[Normmm]

Using th3e word "Mitsubishi" when buying anything doubles the price.

 

[Lucky1]

Some old blacksmiths can make them, if you find the wright one. Had and oldtimer make one for a NH baler, needed it wright away. Worked better than one I ordered from factory.

 

[Lucky1]

Some old blacksmiths can make them, if you find the wright one. Had and oldtimer make one for a NH baler, needed it wright away. Worked better than one I ordered from factory.