Satoh S470D Injector Return Line size

[Steve777]

Does anyone know the correct size rubber return line from the injectors back to the tank?

Could just measure the old ones, but they are quite swollen and not sure I'd get the right size.

Thanks.

 

[Roadworthy]

If they're the ones I'm thinking of I just replaced mine with irrigation drip line parts. There's really no pressure on them. That tractor was a Mitsubishi D2350 if it makes a difference.

 

[thepumpguysc]

It’s going to be metric (mm) so either measure the connector or take it with u to the auto parts store..

 

[gnfightr]

If they're the ones I'm thinking of I just replaced mine with irrigation drip line parts. There's really no pressure on them. That tractor was a Mitsubishi D2350 if it makes a difference.

Measuring the fitting is a good idea, but...make sure to use fuel line otherwise the fuel will deteriorate the line over time and tiny bits of rubber will wind up in you fuel.

 

[Steve777]

Thanks. Looks like I will need to measure. Will probably get Viton fuel line, as it is more resistant to fuels and additives and might last longer.