turnkey4099
Elite Member
Ibuilt this years ago,put it away and got it out again last year. I hated cutting up stuff smallenough not to need splitting, loading it, unloading it. Now I cut the limbs/small stuff to 8' or less and do the processing at home.
Loaded up:
Cut up:
Folds flat when done:
I sized it for a 20" bar - made it 14" between uprights. Should have been 16". Needs to have a _sharp_ chain and a bit of care starting the cut. The top pieces can roll right up and over.
Loaded up:
Cut up:
Folds flat when done:
I sized it for a 20" bar - made it 14" between uprights. Should have been 16". Needs to have a _sharp_ chain and a bit of care starting the cut. The top pieces can roll right up and over.