Scoop for my forks...

[JerryK]

I had an old 3pt trip scoop that I used/bent up for years. Now that I have a tractor with a FEL and hoe, I took the 30" bucket off it and welded it to fit on my front forks. First had to unbend the bucket area... Going to rope or chain it on so it does not slide forward on the forks, at least, that is the plan... Mainly used old scrap steel stuff/anything that would work combined with my typical ' farmer type ' welding skills... Now I can rearrange my trees and bushes at will...

 

[Ken45101]

I like your "hydraulic press" I've used a log splitter for similar function.

Good luck with your new attachment.