Grading Setting Up a Rear Blade on 3pt *DELETED*

   / Setting Up a Rear Blade on 3pt *DELETED* #2  
Re: Setting Up a Rear Blade on 3pt

If you stand behind your tractor, you should have an adjustable link for the right side lower link (hitch point for the implement). The adjustable link will be like a large turnbuckle.

That levels the implement (rear blade) side to side. You can use a level if you like, but I just use a calibrated eyeball.
You mentioned the threads on the adjustable link don't lock in....isn't there a jam nut on that link? There should be...

As far as side to side sway, lower the blade and tighten up your anti-sway links. You'll still get some side to side movement (say...½" or so), but that's about it.
 
   / Setting Up a Rear Blade on 3pt *DELETED*
  • Thread Starter
#3  
Sorry, should have read the manual first prior to asking stupid question. So, in another brilliant moment, I figured I'd delete the post so as not to waste more reader's time. /forums/images/graemlins/crazy.gif Well, this whole thread could have gone better. /forums/images/graemlins/tongue.gif

Roy - thanks for the input. I've pulled out the manual and dialed in the linkages.
 

Tractor & Equipment Auctions

2015 CATERPILLAR 272D2 WHEELED SKID STEER (A50458)
2015 CATERPILLAR...
2020 KOMATSU PC360LC-11 EXCAVATOR (A51242)
2020 KOMATSU...
2000 PETERBILT 357 6X6 DAY CAB ROAD TRACTOR (A51406)
2000 PETERBILT 357...
377780 (A48837)
377780 (A48837)
2019 Chevrolet Tahoe SUV (A49461)
2019 Chevrolet...
2011 TROXELL 140BBL TRIAXLE VACUUM TRAILER (A50854)
2011 TROXELL...
 
Top