JohnnyTractor
Bronze Member
Post deleted by JohnnyTractor
Grading Setting Up a Rear Blade on 3pt *DELETED*
- Thread starter JohnnyTractor
- Start date
- Views: 726
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
Re: Setting Up a Rear Blade on 3pt
If you stand behind your tractor, you should have an adjustable link for the right side lower link (hitch point for the implement). The adjustable link will be like a large turnbuckle.
That levels the implement (rear blade) side to side. You can use a level if you like, but I just use a calibrated eyeball.
You mentioned the threads on the adjustable link don't lock in....isn't there a jam nut on that link? There should be...
As far as side to side sway, lower the blade and tighten up your anti-sway links. You'll still get some side to side movement (say...½" or so), but that's about it.
If you stand behind your tractor, you should have an adjustable link for the right side lower link (hitch point for the implement). The adjustable link will be like a large turnbuckle.
That levels the implement (rear blade) side to side. You can use a level if you like, but I just use a calibrated eyeball.
You mentioned the threads on the adjustable link don't lock in....isn't there a jam nut on that link? There should be...
As far as side to side sway, lower the blade and tighten up your anti-sway links. You'll still get some side to side movement (say...½" or so), but that's about it.
OP
JohnnyTractor
Bronze Member
Sorry, should have read the manual first prior to asking stupid question. So, in another brilliant moment, I figured I'd delete the post so as not to waste more reader's time. /forums/images/graemlins/crazy.gif Well, this whole thread could have gone better. /forums/images/graemlins/tongue.gif
Roy - thanks for the input. I've pulled out the manual and dialed in the linkages.
Roy - thanks for the input. I've pulled out the manual and dialed in the linkages.