MY JOHN DEERE LX 280 WITH A 42 INCH DECK HAS A SEVER VIBRATION WHEN I ENGAGE THE ELECTRIC PTO.THE BLADES,SPINDLES AND BELTS ARE NEW THE DECK IS NOT ROTTED.HAS ANY ONE SEEN A ELECTRIC PTO CAUSE THIS PROBLEM OR AM I LOOKING IN THE WRONG SPOT.ALL OF THE SPRINGS ARE IN GOOD SHAPE ALSO. HELP!!!!!!
SEVER VIBRATION
- Thread starter Gearz
- Start date
- Views: 1863
Welcome to TBN. 
nybirdman
Super Member
May be the wrong blades or the bearings have gone bad;my bet is the bearings.Remove the blades and try again.
Briana03
Elite Member
Hello & WELCOME to TBN!
I moved your thread to the Parts/Repairs Forum.
I moved your thread to the Parts/Repairs Forum.
deereman75
Veteran Member
- Joined
- Apr 29, 2011
- Messages
- 1,912
- Location
- canada
- Tractor
- Deere 2120, Warner & Swasey 6000# offroad forklift, Case W9B loader, various non-running decorations
I am betting something is broken and unbalanced, or one of the bearings you put is is defective, even if you just bought a new one, dont assume it isnt the problem. I would inspect everything closely, to look for any dammage, or defects. Try spinning the bearing by hand, and see if it spins freely, or if it wobbles.
WELL I DID LOOK CLOSER AND FOUND THAT THE MAIN PULLEY FOR THE DECK WAS BINDING SO I ALSO REPLACE IT AND IT HELP BUT NO TOTALLY.I WAS ABOUT TO GIVE UP AND SEND IT TO THE DEALER AND THOUGHT I WOULD JUST CUT MY FRONT YARD AND IT FINALLY BROKE.THE PTO PULLEY BROKE IN HALF AND DESTROYED THE BELT.I HAVE ORDERED THE PATS AND WILL LET YOU KNOW IF IT IS FIXED.I COULD SEE A RUSTED SPOT ON THE PULLEY THAT WAS THE CAUSE OF THE FRACTURE.THANKS:confused2:
Redneck in training
Elite Member
Pictures. We love pictures even low quality from mobile phone. No pictures means you are just making thing up:laughing::laughing::laughing:
