cqaigy2
Super Member
"The SUV in tow slipped from the trailer" Wonder how the SUV was attached to the trailer?
Share Pics of People Hauling or Towing Something Wrong
- Thread starter 94BULLITT
- Start date
- Views: 5050474
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 8,078
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
Gravity?
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,712
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
.........................Robert_in_NY ATTACH said:
You gotta be kidding me
wonder how it handles on frost heaves. :confused2:Reb954
Platinum Member
.........................
You gotta be kidding me
Just using rough numbers, assuming the wheel is 3" diameter, it is making a complete rotation 6,740 times per mile. I wonder how long the bearing/bushing will last?
Probably just until it doesn't.
I got behind a pickup today towing a tandem axle trailer with 4 pallets of asphalt roofing shingles, and lumber stacked alongside. The right rear tire was gone, and he was limping along on the rim. I don't know where he was going, I followed him for about a mile before turning off and he was still pulling. It wasn't really a hazard per se, just hard on the rigging. (And a PITA to get behind.)
Dftodd
Super Star Member
- Joined
- Oct 19, 2014
- Messages
- 10,473
- Location
- vilonia, arkansas
- Tractor
- Massey Ferguson 1825E, Kubota Z121S
Saw this today. Popped the pic while stopped at a light.
Followed him about a mile. He almost lost it twice when hitting bumps.
Followed him about a mile. He almost lost it twice when hitting bumps.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 14,548
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
That stuff is not heavy and could be fairly slippery. Crazy. I assume you weren't following him close!
Dftodd
Super Star Member
- Joined
- Oct 19, 2014
- Messages
- 10,473
- Location
- vilonia, arkansas
- Tractor
- Massey Ferguson 1825E, Kubota Z121S
I wasn't. Half way down the strip he jumped into the other lane. I still held back and kept him a few car lengths ahead of me. He had someone tailgating him though. I kept waiting for one of the bags let loose and hit the tailgater.
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,951
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
Not very far. We had a similar wheel on a hitch carrier behind a Ranger since it was prone to dragging. It didn’t survive a couple mile trip rolling the whole way. It’s almost like plastic swivel wheels aren’t meant for 45mph service. Ours was actually a nicer urethane wheel with bearings.
coldsteelva
Veteran Member
Should have used a decent tweel caster.
