Share Pics of People Hauling or Towing Something Wrong

[TMGT]

Perfect for putting double the tongue weight on your truck, won't damage the tarmac. Wonder how it works at 60 miles an hour though!

For about a minute.

 

[Peter 315]

Well if you use red, green ,or moly grease you might get 2 minutes....

 

[Jstpssng]

Springs are grossly overrated. Once the axle comes up against the frame, he's golden.

 

[paulfun9]

Seen on Facebook:

View attachment 676304

Just wait and see what happens when he tries to make a turn.

Thats an accident waiting to happen.

But my very first thought what a f覧覧 idiot!

 

[Reb954]

Perfect for putting double the tongue weight on your truck, won't damage the tarmac. Wonder how it works at 60 miles an hour though!

It should hold up alright. If my math is correct it will only be turning at 10,089 RPM. That is estimating the roller diameter at 2".

Edit.

If the roller were 3" diameter the RPM is reduced to 6,726.

 

[3Ts]

Should be no problem, it's about the size of a model airplane engine which turns at something like 20,000 to 30,000 rpm. So, 10,089 rpm is well below that.

 

[BravoXray]

Only one strap on the load. The DOT will get him for that.

 

[duramaxsky]

Only one strap on the load. The DOT will get him for that.

Yeah that's what they will notice.

 

[rangerfredbob]

Should be no problem, it's about the size of a model airplane engine which turns at something like 20,000 to 30,000 rpm. So, 10,089 rpm is well below that.

it's nitro car engines that run 30k rpm, most plane engines run in the 12k rpm range... Not arguing, just sayin prop tip speed gets sonic not much past that in some cases if I remember right, it's been a few years since I've been big into RC flying...

 

[bcp]

Found picture:

Bruce