Shaver HD-8 post drive and return line on L4701

[art]

I had the HD-10 on my L4400 connected to the rear outputs, used a bungie cord to hold the lever forward. Worked fine the whole time. It was slow on the upstroke but worked fine for the pound stroke. Please keep your hands out of the way!! Had a helper slide his fingers over the top of a post, now we call him stubby..

I have run the return line through the valve as well as through a dump line. Big difference!!!!!!

 

[RickB]

I have run the return line through the valve as well as through a dump line. Big difference!!!!!!

Agreed! A zero pressure return is recommended for good reason.