goeduck
Super Member
Dang, I need to put up a flag!
Show me yours!
- Thread starter Doofy
- Start date
- Views: 4462
Yes Sir and you can use your tractor to do it. Win Win
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
After 911, I had two little cloth American Flags on the front hood corners of my Gravely Walk Behind. They unfortunately didn't last long with branches and vibration. I wish I had taken a picture.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
I was going to use my BH to dig the hole for the pole but I lucked out with the location being at the end of a border fence. I repurposed a couple of metal straps left over from HF blast cabinet build, and screwed them to the 4x4 post. No digging required this time unfortunately.
The other benefit is the HF pole is on the light side so in winds the above ground support should stiffen and strengthen the pole quite a bit.
DavidL61
Bronze Member
We have had the flag up for about 2 years. Love seeing it everyday.
goeduck
Super Member
You guys illuminate your flag at night, lower and take it in, or?
Industrial Toys
Super Star Member
- Joined
- Feb 25, 2008
- Messages
- 16,742
- Location
- Ontario Canada
- Tractor
- Kubota R510 Wheel Loader + Cab and backhoe, JD 6200 Open Station, Cushman 6150, 4x4, ten foot 56 hp Kubota diesel hydraulic wing mower, Steiner 430 Diesel Max, Kawasaki Diesel Mule, JD 4x2 Electric Gator
Making sure it doesn't touch the ground!
Looks like the same pole I got from Amazon. The sleeve was an oddball size but I found an old driveshaft that it fit into. Cemented it in at 36" deep. My sleeve is full of water from all the rain. Not sure if the water is coming in at the telescoping portions or running down the outside of the pole and in around the sleeve. Need to suck it out before freeze up.
I bought solar flagpole light but is not that great. I'll get a photo of it after dark.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Me too... off of amazon. I mounted mine on top of the fence so I’m getting more illumination than typical. Works great. Might be a little tough to see. I’ll try to get a decent night shot.
