Single Hydraulic Line implement for Deere 4600

[dcraytor]

So I recently acquired a Woods D80-2 Bush hog, that has a single hydrualic line for raise and lower rear wheels.

My SCV has hydraulic connections. Do I just plug the single hose into the one hydraulic port and it will work? I'm a little nervous as I have used only implements that had a pair of hydraulic lines.

 

[beenthere]

Try it, should not be a problem. Can't hurt anything. Likely it is a single acting cylinder and uses the weight of the bush hog to return the cylinder and bush hog.

I use a single acting cylinder to raise my snow plow blade and only use one line to the cylinder.

 

[kennyd]

No problem at all. The system will go into relief while the implement is lowering, but that won't cause any issues.