Sizing hydraulics correctly

[DaveOmak]

Larry, You are getting me into trouble here! Your suggested motor could be used on my mower, rototiller, post hole auger, baler etc with little or no additional expense. No PTO shafts to hook up. No need to worry about my Jubilee not being live PTO. All I would need is a couling on each piece of equipment. Gonna loose sleep tonight!
Dave

 

[J_J]

35 HP can push 20 GPM @ 2500 psi, using a 1.7 cu in pump

20 GPM/2800 psi = 1.7 cu in pump


Motor @ 8.5 cu in @ 20 GPM = 544 rpm

MOTOR TORQUE = 8.5 cu in = 2500 psi = 3348 in lbs/279 ft lbs

Motor HP @ 85 % eff = 29.75 HP