Skid steer adapter for the 4410?
- Thread starter turbo36
- Start date
TCowner
Platinum Member
John Deere shows an adapter for their new 400X loaders that fit the new 4120-4720 tractors. You can find it on their website if you do a "build your own". I believe it is just under $400.
I don't know if this will fit the 420 or 430 loader on your 4410. I saw a 400X on a 4520 at the Minnesota State Fair and the way the bucket attaches to the loader looks very similar to the 420-460 loaders. If it fits the new X loader then it might fit yours.
I'm sure your dealer could find out if it will fit.
I don't know if this will fit the 420 or 430 loader on your 4410. I saw a 400X on a 4520 at the Minnesota State Fair and the way the bucket attaches to the loader looks very similar to the 420-460 loaders. If it fits the new X loader then it might fit yours.
I'm sure your dealer could find out if it will fit.
rockyridgefarm
Elite Member
I am almost certain that ATI makes a skidsteer adapter...
EquipmentJunkie
Platinum Member
ATI Corp. is a TBN advertiser. Check your banner ads. (Orange loader bucket with a tooth bar.)
In reference to Deere's skid steer quick attach option, it looks like it replaces the standard JD quick attach on the 400X loaders. Thus, you are committed to the skid steer type quick attach. I don't know if it would work on older loaders like the 430 or 460.
ATI's Tach-All quick attach is an adapter plate. It mounts onto the JD quick attach so that if you have both Deere and skid steer attachments, you can use both.
In reference to Deere's skid steer quick attach option, it looks like it replaces the standard JD quick attach on the 400X loaders. Thus, you are committed to the skid steer type quick attach. I don't know if it would work on older loaders like the 430 or 460.
ATI's Tach-All quick attach is an adapter plate. It mounts onto the JD quick attach so that if you have both Deere and skid steer attachments, you can use both.