Skidder / Pusher / 2" Reciver / Maybe More?

   / Skidder / Pusher / 2" Reciver / Maybe More? #1  

blueone

Bronze Member
Joined
Jan 14, 2010
Messages
76
Location
Eastern Panhandle WV
Tractor
KOBOTA L3540
It's less than a week old but has a couple of mods. First was the Chain Saw holders [made of 1/2 black UHMW] then the extra eye bolts for what ever fits em, and last [today] the 2" receiver for many uses, such as the Splitter, Boat, and Wood Trailer. I also had a brain storm about pulling the chain under the log instead of digging a hole for it to pass. Silver rods in Photobucket link and below.


I posted this last week here http://www.tractorbynet.com/forums/build-yourself/196275-i-need-cut-some-wood.html but have made some mods since. I thought I'd planned this out but as I got it hooked up I saw ssssoooo much that I had forgotten to think of:confused2:. Take a look at it from last week till now link below. May be more to come who knows.
Skidder2011 pictures by brickdust1 - Photobucket

May get some paint this later in the week, Fri is to be 60 well see but Orange of course.
 

Attachments

  • DSCF0084.jpg
    DSCF0084.jpg
    55.9 KB · Views: 234
  • DSCF0082.jpg
    DSCF0082.jpg
    69 KB · Views: 223
  • DSCF0085.jpg
    DSCF0085.jpg
    78.1 KB · Views: 213
  • DSCF0073.jpg
    DSCF0073.jpg
    64.7 KB · Views: 272
  • DSCF0074.jpg
    DSCF0074.jpg
    56.8 KB · Views: 217
  • DSCF0077.jpg
    DSCF0077.jpg
    56.8 KB · Views: 185
  • DSCF0063.jpg
    DSCF0063.jpg
    99 KB · Views: 246
  • DSCF0062.jpg
    DSCF0062.jpg
    118.8 KB · Views: 197
  • DSCF0055.jpg
    DSCF0055.jpg
    67 KB · Views: 280
  • DSCF0065.jpg
    DSCF0065.jpg
    74 KB · Views: 180
  • DSCF0067.jpg
    DSCF0067.jpg
    81.4 KB · Views: 179
  • DSCF0072.jpg
    DSCF0072.jpg
    60.5 KB · Views: 181
  • DSCF0070.jpg
    DSCF0070.jpg
    64.8 KB · Views: 184
   / Skidder / Pusher / 2" Reciver / Maybe More? #2  
Looks like your imagination is in gear! These things have been thought of before. The limiting factor in having the receiver hitch built in to your unit is how low you can extend it. I very much like the the geometry that places some weight on the rear wheels but does not cantilever too much off the fronts, or so it appears to me in the photos. In any event it is a very useful attachment you have created!:thumbsup:
 
   / Skidder / Pusher / 2" Reciver / Maybe More?
  • Thread Starter
#3  
Looks like your imagination is in gear! These things have been thought of before. The limiting factor in having the receiver hitch built in to your unit is how low you can extend it. I very much like the the geometry that places some weight on the rear wheels but does not cantilever too much off the fronts, or so it appears to me in the photos. In any event it is a very useful attachment you have created!:thumbsup:

Thanks, magicheater That's what I need, weight on the rears. My place has alot of tight places where the tractor can barely fit between other trees that I don't want to damage. So the less equipment I have to take into those areas the better.
 

Tractor & Equipment Auctions

2013 VOLVO VNL64T TANDEM AXLE MID ROOF SLEEPER (A54313)
2013 VOLVO VNL64T...
2012 Big Tex T/A 20 ft. Gooseneck Trailer (A53117)
2012 Big Tex T/A...
LINDE H70 FORKLIFT (A53843)
LINDE H70 FORKLIFT...
2020 MACK PINNACLE DAY CAB (A53426)
2020 MACK PINNACLE...
2019 Caterpillar DP35N 7,000lb Diesel Forklift (A51691)
2019 Caterpillar...
2018 KENWORTH T880 DAYCAB (A53843)
2018 KENWORTH T880...
 
Top