sluggish 3ph

   / sluggish 3ph #1  

gsgator

Member
Joined
Oct 7, 2004
Messages
30
Location
FL Suncoast
Tractor
Branson 2910
Does anyone else experience slow response from the 3ph? My 2910 has about a 3-5 second delay, which makes it frustrating for grading/etc. This model does not have the separate pump like the "i" models. Is this the reason for the delay?
 
   / sluggish 3ph #2  
Have you turned the dial between you legs all the way to your right?
The dial adjust how fast the 3pt will drop.
 
   / sluggish 3ph #3  
As Wallace said, try the round knob. It allows you to taylor the speed of the 3ph to your varios implements. I have used it to slow down the lift for my auger and to speed it up for mowing.
 
   / sluggish 3ph
  • Thread Starter
#4  
I have adjusted it all the way to "fast", can't remember if that's right or left. Maybe I need to play with it a little bit and see if it makes a difference either way. Maybe the adjuster isn't adjusting. Forgot about that. Thanks.
 
   / sluggish 3ph #5  
Mine is all the way to the right and is still kinda slow. Maybe that is just the way it is.
 
   / sluggish 3ph #6  
GSGATOR; I have a alice chalmers that will slow down when water gets in the hydralics. I have not let my Branson sit out so I don't know if water will enter the system. My 3820 has worked great so far, except for white smoke on start!!!

I will clean filter to correct problem on A.C..

Question for you; do you shrimp over around Daytona???????

As always thanks for help; and to all that is looking for a Branson, come by and check out my 3820...

tnaz
 
   / sluggish 3ph
  • Thread Starter
#7  
I live in Myakka City, which is about 180 miles south of Gainesville. I'm not to sure about shrimping in Daytona although a friend of mine just came back from there with about 25 pounds of shrimp from a commercial fisherman. When I was a kid, my dad used to take us shrimping in southern Sarasota County, but I don't think the shrimp come through here like they used to. When I lived in Gainesville, we used to go to Horshoe Cove and catch snook. You ever go there?
 
   / sluggish 3ph #8  
Hey GSGATOR;

Yep, I have fished Horseshoe, up to Steinhatchee and down to Yankeetown-Crystal River; but I shore aint no pro at catchin!!!!

I don't know why I thought you were from the Daytona area, sorry about that.

How about that tractor, did you get the lift figured out?
tnaz
 
   / sluggish 3ph #9  
Hey GSGATOR; just looked on my map; hope you guys weathered that hurricane!!!

Good luck with our prayers.

tnaz
 

Tractor & Equipment Auctions

1/4 '' Wolverine Universal Quick Attach Mount Plate (A51573)
1/4 '' Wolverine...
2017 Ram 4500 Bucket Truck (A53472)
2017 Ram 4500...
Informational Lot - Financing (A53472)
Informational Lot...
Echo SRM2620 Gas Trimmer (A52377)
Echo SRM2620 Gas...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2015 PETERBILT 389 TRI-AXLE MID-ROOF SLEEPER (A52472)
2015 PETERBILT 389...
 
Top